P-9120DH 9000 Series Amplifier

P-9120DH CU

The P-9120DH Power Amplifier is a 2-channel amplifier (120 W × 2) providing 70-volt line output. It can be used not only as TOA's 9000 series power amplifier but also as stand-alone amplifier, thus covering wide range of applications.

 

Specification
* 0 dB = 1 V
Power Source 120 V AC, 60 Hz
Power Consumption 404 W (rated output), 208 W (UL60065)
Output Speaker output CH 1, CH 2: 120 W, 41 Ω × 2, BTL output (70 V line), M4 screw terminal,
distance between barriers: 9 mm (0.35")
Input CH 1, CH 2 input: -20 dB* or 0 dB* (switchable), 10 kΩ, electronically-balanced,
removable terminal block
CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)
Power Band Width 20 - 20,000 Hz, 0.08% T.H.D.
Frequency Response 20 - 20k Hz (+1, -3 dB)
S/N Ratio At Input short, 20 - 20k Hz, Input level switch in 0 dB* position
Output volume min.: 105 dB, Output volume max.: 97 dB
Total Harmonic Distortion 0.008% (22 kHz LPF, 1 kHz, rated output, input level switch in 0 dB* position)
Function Output disconnected for approx. 5 s after switching power on.
Air Cooling Forced air cooling (Fan speed: varies depending on the temperature.)
Operating Temperature -10℃ to +40℃ (14゜F to 104゜F)
Operating Humidity 35% to 80% RH (no condensation)
Finish Front panel: Aluminum, hair-line, black
Case: SECC, black, paint
Dimensions 420 (W) × 107.6 (H) × 406 (D) mm (16.54" × 4.24" × 15.98")
Weight 10 kg (22.05 lb)
Accessory Power cord (2 m (6.56 ft)) …1, Volume control cover (YA-920) …2,
Rack mount bracket …2, Bracket mounting screw (M4 × 16) …4,
Removable terminal plug (3 pins) …2, Terminal cover …1,
Terminal cover mounting screw (M4 × 8) …2