M-800RM

M-800RM Remote Microphone

M-800RM

Designed for exclusive use with the M-8080D, the M-800RM Remote Microphone has volume control and zone selector as well as an indicator LED on the gooseneck microphone.

NOTE: Shielded Twisted Pair (STP) CAT5e or CAT6 is required when connecting the DSP to controllers for best performance.

   

Update System to Enable Dante

 Firmware Update Instructions

 MUST RUN FIRST - M-8080D Firmware Update Tool

  M-8080D Controller Software Ver. 6.0  (Applicable only to 6.0)

  M-8080D Controller Software Ver. 5.3 and below

  M-800DT Dante Module Firmware Update

Specifications

Power Source   24V DC (Powered by M-8080D or M-804EX)
Audio Output 0 dBV, electronic balanced, Rj45 Connector
Gooseneck Microphone Unidirectional electret condenser microphone
Frequency Response 20 - 20,000 Hz, ±3 dB
Total Harmonic Distortion 0.01%
RD port Transmits and receives AES3 digital audio plus control data
Connect to M-8080D or M-804EX, RJ45 Connector
USB port Load WAV / MP3 files for chimes sound
Volume Control Microphone volume control and all zone selector
Zone Selector Can address 1 to 64 different zones
Display LCD Screen
Displays device information: ID, volume, zone selector
Indicators Input Signal (Green) x1, Input Peak (Red) x1, Busy (Red) x1, Comm (Green) x1
Operating Temperature 0 °C to +40°C (32°F to 104°F)
Operating Humidity 90% RH or less (no condensation)
Finish  Case: Surface-treated steel plate, black, paint
Dimensions 176 (W) x 61.8 H) X 162.4 (D) mm   (6.93" X  2.43" X 6.40")
Weight 0.8 kg (1.76 lbs.)